其它文章
对NAT中术语和转换关系的理解和研究
关于一个CCIE考试题目的研究(重分发)
WL-500g.P中小企业和SOHO局域网方案
案例分析 - 江苏省某中学网络故障诊断
网络协议:Ethereal协议分析系统介绍
教你一招:全面认识浏览器工具条
全面图文解析:交换机接口及连接技巧
网络 “大换血”,“短板”变优势
IE又有漏洞曝光微软建议停用ActiveX
LINKSYS采用802.11N无线宽带路由器上市
Cisco技术 / 网络知识 / 网络管理 / 解决IP地址冲突的方法--DHCP SNOOPING

解决IP地址冲突的方法--DHCP SNOOPING

作者:     http://cisco.ccxx.net
使用的方法是采用DHCP方式为用户分配IP,然后限定这些用户只能使用动态IP的方式,如果改成静态IP的方式则不能连接上网络;也就是使用了DHCP SNOOPING功能。
例子:
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service p assword-encryption
service compress-config
!
hostname C4-2_4506
!
enable password xxxxxxx!
clock timezone GMT 8
ip subnet-zero


no ip domain-lookup
!
ip dhcp snooping vlan 180-181 // 对哪些VLAN 进行限制
ip dhcp snooping
ip arp inspection vlan 180-181
ip arp inspection validate src-mac dst-mac ip




errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause security-violation
errdisable recovery cause channel-misconfig
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery cause l2ptguard
errdisable recovery cause psecure-violation
errdisable recovery cause gbic-invalid
errdisable recovery cause dhcp-rate-limit
errdisable recovery cause unicast-flood
errdisable recovery cause vmps
errdisable recovery cause arp-inspection
errdisable recovery interval 30
spanning-tree extend system-id
!
!

interface GigabitEthernet2/1 // 对该端口接入的用户进行限制,可以下联交换机
ip arp inspection limit rate 100
arp timeout 2
ip dhcp snooping limit rate 100
!



interface GigabitEthernet2/2
ip arp inspection limit rate 100
arp timeout 2
ip dhcp snooping limit rate 100
!
interface GigabitEthernet2/3
ip arp inspection limit rate 100
arp timeout 2
ip dhcp snooping limit rate 100
!
interface GigabitEthernet2/4
ip arp inspection limit rate 100
arp timeout 2
ip dhcp snooping limit rate 100
--More--

编者注:对不需要明确地址的所有人的时候是一个很好的解决办法。另外,可以查看www.cisco.com的
IP Source Guard
Similar to DHCP snooping, this feature is enabled on a DHCP snooping untrusted Layer 2 port. Initially, all IP traffic on the port is blocked except for DHCP packets that are captured by the DHCP snooping process. When a client receives a valid IP address from the DHCP server, or when a static IP source binding is configured by the user, a per-port and VLAN Access Control List (PACL) is installed on the port. This process restricts the client IP traffic to those source IP addresses configured in the binding; any IP traffic with a source IP address other than that in the IP source binding will be filtered out. This filtering limits a host's ability to attack the network by claiming neighbor host's IP address.
收藏本页

共 0 人推荐文章 解决IP地址冲突的方法--DHCP SNOOPING

Copyright © 2006 cisco.ccxx.net 版权所有.提供Cisco技术,Cisco培训,CCNA,CCNP,CCIE培训,Cisco论坛CCIE实验室
上海地区Cisco培训、CCNA培训、CCNP培训、CCIE培训